This equipment is designed standing style, adopts the most advanced six angle shape, the electric field is made up of six angle combs, at the center of every comb there is a stainless steel cathode bringing sting, which makes the utilizing efficiency of match between average electric field strength and pole board achieves the most reasonable. The total area of its anode is 1.5 times as the same section area of the horizontal style. If it compares to the cylinder electric field, a FLD-8 model equipment corresponds to 38 pieces of cylinder electric fields whose length is 4 meters. The high voltage insulator is installed in special insulated case, in order to prevent staining with dust and convenient to clean up. The whole electric field is hung by springs, ensuring enough shaking strength but not affect the shell of the equipment and steady of bedrock.
When the density of dust in the entrance is 50 gram per cubic meter, the dust disposal efficiency can reach above 95%. Shell and electric field both are punched to molding by steel boards, strength is high, light weight, and the figuration is handsome. The equipment has 8 overhauling doors, in virtue of a set of secure baluster ladders, you can reach to everywhere of the equipment and enter into every corner of it. The equipment is used for grinding machine can increase the airflow properly, expedite the flowage of materials in grinding machine, adding to collected dust, the output of grinding machine can increase about 20%.
In the picture：
1. Upstairs floor
2. Wind exit of the equipment
3. Overhauling door of electric field
4. Insulator box
5. overhauling flat roof
6. electric field
7. Downstairs floor
8. Overhauling door of ash bucket
9. Entrance of the equipment
10. wind separating wheel
